DPS-EQ
The Dynamic
Power Saving
What is the DPS system?
The Dynamic Power Saving (DPS) system, the result of a unique Israeli development from Elspec Systems, provides a comprehensive and adequate response to the phenomena caused by the behavior of the power grid and the influence of the systems and loads installed in the factory, especially the non-linear loads.
Harmonics, voltage dips and surges, transient phenomena, voltage and current flickers, power factor, these are the main influencing factors. Addressing and providing a correct reaction will lead to the optimization of the supply voltage and its stabilization, and consequently to a decrease in the plant’s power consumption resulting in a significant saving in energy consumption that will be reflected in the electricity bill.
How to adjust the system
The DPS preserves the quality of electricity at a high level which ensures proper operation of the devices connected to it without any fear of system crashes or ineffective operation that will cause rapid wear and shorten its lifetime.
The DPS system is installed at the main electrical room in the factory and thanks to its small dimensions does not require any changes to the existing infrastructure or other installed devices.
The DPS system handles the natural transition phenomena in the supply voltage to the plant from the electricity supplier.
As a result of lowering the current, the energy losses for the copper infrastructure (cables and transformers) will be significantly reduced.
Filtering out voltage and current harmonics caused by non-linear load and results in energy losses will directly lead to a significant reduction of these losses.
As a result of the DPS operation, the supply voltage is stabilized while reducing voltage surges and dips filtering harmonics and eliminate flickers. Voltage can be adjusted to an optimal level that required for the proper operation of the systems in the plant without fear of faults or downtime
The DPS system is modular and offers a custom and flexible design that correspond to the power of the transformers that feed the plant or other loads connected to it.
אז איך מתאימים את המערכת האולטימטיבית לרשת החשמל הקיימת במפעל?
בדיקת התכנות וכדאיות
במידה והבדיקה הראשונית מראה כדאיות נבצע סקר מתקן מקיף ע”י ביצוע מדידות הכולל התקנת מכשיר מדידה לתקופה של שבוע באתר הלקוח ופירוק המכשיר בתום ביצוע המדידות.
בתום הבדיקה וניתוח הנתונים יוגש דו”ח מסכם מפורט עם המלצות לאפיון המערכת הייעודית, המלצות ליישום והחיסכון האנרגטי שיושג.
התקנת המערכת ע"י מתקין מורשה
בעת ההתקנה וההפעלה תיבדק התנהגות מערכת ה DPS והשפעתה על המערכת המפעלית. ייבדקו הפונקציות השונות: סינון הרמוניות, הורדת הזרם, תגובה מהירה ונכונה לנחשולי מתח/שקיעות מתח וריצודים.
דו"ח ביצועים לאחר ההתקנה
המערכת תיבדק ותאושר ע”י בודק חיצוני מוסמך